Gluquat 300

High-efficiency disinfectant

GLUQUAT 300 is a non-corrosive, glutaraldehyde/ quaternary ammonium-based disinfectant used for disinfection of agricultural and horticultural buildings such as hog barns and poultry housing facilities, hatcheries and livestock trucks and trailers.

Features And Benefits

  • Non-corrosive
  • Contains 12.5% glutaraldehyde
  • Contains 6,7% 5th generation quartenary ammonium compounds
  • Effective in warm, cold and hard water
  • Wide virucidal and microbiocidal spectrum
  • Low reactivity with organic matter
  • Extremely efficient and fast acting
  • Pleasant odour

DIRECTION FOR USE

Equipment to be treated

Use Procedure

Concentration

Contact time

Temperature

Rinsing

Agricultural and horticultural equipment and premises: trucks, ceilings, walls, floors.

 

1.Remove all animals and feed.

2.Remove all dirt, manure, debris from floor or surface.

3.Pre-rinse with water to pre-clean. (High pressure if possible).

4.Clean with an alkaline cleaner.

5.Rinse with water. (High pressure if possible).

6. Apply GLUQUAT 300 to disinfect the cleaned surface manually, by using a foaming applicator, or by fogging.

7.Allow the disinfected surface to air for 4 hours before admitting livestock.

 

0,5% (5 ml/litre or 25 ml/5 litres of water) (1:200)

 

Minimum 10 minutes. Do not house livestock or use equipment until treatment has been absorbed and set to dry.

 

Between 4°C and 40°C (39 and 105°F).

 

All food contact surfaces, treated feed racks, mangers, troughs, automatic feeders, fountains and waterers must be thoroughly rinsed with potable prior to reuse.

 

TESTED SUCCESSFULLY IN INDEPENDENT LABORATORY against:

  • Pseudomonas aeruginosa
  • Salmonella enterica
  • Staphylococcus aureus
  • Infectious Bursal Disease (IBD)
  • Porcine Epidemic Diarrhea (PED)
  • Avian Influenza Virus Type A (H5N1)
  • Infection Laryngotracheitis (ILT)
  • Porcine Reproductive and Respiratory Syndrome (PRRS)

Receive the latest information about solutions, products and offers